Go!Bridge IP Communicator (BRDG1)

Broadband Communication for GC2 Panels

The Go!Bridge™ IP Communicator provides Internet connectivity between the GC2 Panel and the monitoring service’s Central Station. To enable connectivity, the 900 MHz Transceiver (2GIG-XCVR2-345) must be installed in the Control Panel.

It supports firmware updates over the Internet, provides interactive security services, and enables supervision using signal-forwarding to the Central Station. For wireless communication with the Control Panel, the 900MHz Transceiver Module (2GIG-XCVR2-345) must be installed in the panel. The Go!Bridge also connects to the Internet via a local network router using an Ethernet cable (not provided).

Features

  • Secure Internet reporting capabilities
  • 256-bit AES Encryption
  • Wireless panel integration via 900MHz frequency
  • CAT5 Ethernet quick connection to hub/router
  • Full Contact ID with high-speed reporting
  • Remote access capabilities via Internet or smartphone
  • Easy install behind firewalls DHCP Addressing for IP network
  • Free firmware update option over the Internet
  • Compatible with Alarm.com and Uplink

Specifications

  • Wireless Signal Range: 500 ft, open air, with Wireless Control Panel
  • Transceiver: Silicon Labs SI1001-E-GM2
  • Transceiver Frequency: 25 channel frequency-hopping spread spectrum, 403 kHz channel spacing (910.2-920.275 MHz)
  • Modulation Type: GFSK modulation, 128 kpbs
  • RF Power: +19dBm Maximum
  • Ethernet: 10/100 BaseT
  • Dimensions (L x W x H): 6.24 x 4.5 x 1 in
  • Weight: 9.6 oz
  • Housing Material: Cycoloy™ Resin C2800 (Rated to UL 94 V-0: Flammability Standard)
  • Color: White
  • Operating Temperature: 32° F to 120.2° F, (0° C to +49° C)
  • Relative Humidity: 5-95% Non-Condensing
  • Operating Voltage: 5VDC
  • Certification: ETL, FCC, IC, IFETEL, and NOM

System Requirements

  • GC2 Panel
  • Firmware version 1.12 or higher
  • 2GIG-XCVR2-345 900 MHz Transceiver
  • Internet connection

Model Number: 2GIG-BRDG1-900